Welcome to Rajdeep Metals
Maulana Azad Road, Mumbai-400004
Product 02 / 08

Sheets & Plates

Cold-rolled sheets, hot-rolled plates, coils and strips in Stainless Steel, Duplex, Nickel Alloys, Carbon Steel and Alloy Steel — cut to size in Mumbai and shipped worldwide.

Cold & Hot Rolled Stainless steel sheets and plates stocked by Rajdeep Metals
Product Overview

Flat Products Cut to Your Drawing

Rajdeep Metals supplies sheets, plates, coils and strips for pressure vessels, tanks, heat-exchanger tube sheets, process equipment and architectural work. Each plate carries its mill heat number and is supplied with the corresponding test certificate.

We stock thin-gauge cold-rolled sheet through to heavy hot-rolled plate, and can cut, shear or profile material to your sizes so you pay for the metal you actually use.

  • Thickness 0.3 mm to 100 mm
  • Widths up to 2500 mm
  • No.1, 2B, BA, No.4, HL, No.8
  • EN 10204 3.1 / 3.2 MTC
  • Plasma, laser & shear cutting
  • PVC film protection on request

Types of Sheets & Plates

Flat-rolled product forms we supply
Cold Rolled Sheets – 3D drawing
Cold Rolled Sheets
Hot Rolled Plates – 3D drawing
Hot Rolled Plates
Coils – 3D drawing
Coils
Strips & Slit Coils – 3D drawing
Strips & Slit Coils
Shim Sheets – 3D drawing
Shim Sheets
Perforated Sheets – 3D drawing
Perforated Sheets
Chequered Plates – 3D drawing
Chequered Plates
Circles & Rings – 3D drawing
Circles & Rings
Mirror Finish Sheets – 3D drawing
Mirror Finish Sheets
Hairline Sheets – 3D drawing
Hairline Sheets
Pressure Vessel Plates – 3D drawing
Pressure Vessel Plates
Cut-to-Size Blanks – 3D drawing
Cut-to-Size Blanks

Specifications

Standards, size range and supply conditions
Stainless SteelASTM A240 / ASME SA240, general requirements ASTM A480 / ASME SA480
Nickel AlloysASTM B127, B168, B409, B424, B443, B575 / ASME SB equivalents
Carbon SteelASTM A516 Gr. 60 / 70, A36, A285 Gr. C / ASME SA516, SA285
Alloy SteelASTM A387 Gr. 11 / 22 (Class 1 & 2) / ASME SA387
ThicknessSheets: 0.3 mm – 6 mm  |  Plates: 6 mm – 100 mm
Width1000, 1220, 1250, 1500, 2000, 2500 mm
Length2000, 2440, 2500, 3000, 6000 mm, coils, or cut to required length
Surface FinishNo.1 (HRAP), 2B, BA (Bright Annealed), No.4, HL (Hairline), No.8 (Mirror)
FormsSheets, Plates, Coils, Strips, Shims, Perforated, Chequered, Circles
EdgeMill Edge, Slit Edge, Trimmed Edge
ProcessingShearing, Plasma / Laser Cutting, Slitting, Levelling, PVC Coating
TestingPMI, IGC (ASTM A262), Ultrasonic (A578 / A435), Bend, Hardness, Tensile

Grades Available

Common grades held in stock or sourced at short notice

Stainless Steel

201202304 304L304H316 316L316Ti321 347310S317L 904L409410 430

Duplex & Super Duplex

UNS S31803UNS S32205 UNS S32750UNS S32760

Nickel Alloys

Monel 400Inconel 600 Inconel 625Incoloy 800 / 800H Incoloy 825Hastelloy C276 Hastelloy C22

Carbon & Alloy Steel

A516 Gr. 60A516 Gr. 70 A36A285 Gr. C A387 Gr. 11A387 Gr. 22

Chemical Composition

Weight % — maximum unless a range is shown (ASTM A240)
GradeCMnSiPSCrNiMoOther
3040.082.000.750.0450.03018.0 – 20.08.0 – 10.5—N 0.10
304L0.0302.000.750.0450.03017.5 – 19.58.0 – 12.0—N 0.10
3160.082.000.750.0450.03016.0 – 18.010.0 – 14.02.00 – 3.00N 0.10
316L0.0302.000.750.0450.03016.0 – 18.010.0 – 14.02.00 – 3.00N 0.10
3210.082.000.750.0450.03017.0 – 19.09.0 – 12.0—Ti 5×(C+N) – 0.70, N 0.10
310S0.082.001.500.0450.03024.0 – 26.019.0 – 22.0——
904L0.0202.001.000.0450.03519.0 – 23.023.0 – 28.04.0 – 5.0Cu 1.0 – 2.0, N 0.10
2205 (S32205)0.0302.001.000.0300.02022.0 – 23.04.5 – 6.53.0 – 3.5N 0.14 – 0.20

Chemical composition for nickel alloy, carbon steel and alloy steel plates is listed on the respective material pages.

Mechanical Properties

Minimum values at room temperature (ASTM A240 / A516)
GradeTensile Strength (MPa)Yield Strength 0.2% (MPa)Elongation in 50 mm (%)Hardness (max)
30451520540201 HB
304L48517040201 HB
31651520540217 HB
316L48517040217 HB
32151520540217 HB
310S51520540217 HB
904L49022035—
2205 (S32205)65545025293 HB
A516 Gr. 70485 – 62026017*—

* A516 Gr. 70 elongation is 17% in 200 mm (21% in 50 mm). Values for other carbon and alloy steel plates are on the respective material pages.

Dimension Chart

Stainless steel sheet gauge chart and standard sheet sizes

Stainless Steel Sheet Gauge Chart

GaugeThickness (mm)Thickness (inch)Weight (kg/m²)
74.760.18737.75
84.190.16533.23
103.570.14128.31
113.180.12525.22
122.780.10922.05
141.980.07815.70
161.590.06312.61
181.270.05010.07
200.950.0377.53
220.790.0316.26
240.640.0255.08
260.480.0193.81
280.380.0153.01

Standard Sheet & Plate Sizes

Size (mm)Size (ft)Typical Use
1000 × 20003.3 × 6.6Cold-rolled sheets
1220 × 24404 × 8Cold-rolled sheets, 2B / BA / No.4
1250 × 25004.1 × 8.2Cold-rolled sheets
1500 × 30005 × 10Sheets & thin plates
1500 × 60005 × 20Hot-rolled plates
2000 × 60006.6 × 20Hot-rolled plates
2500 × 60008.2 × 20Heavy plates

Weights calculated for austenitic stainless steel at a density of 7.93 g/cm³ (kg/m² = thickness in mm × 7.93). See Technical Data for other materials.

Applications

Industries that rely on our sheets & plates

Oil & Gas Refineries

Pressure Vessels & Tanks

Chemical Processing

Heat Exchangers

Power Generation

Pharmaceuticals

Food & Dairy

Architecture & Cladding

Desalination & Water

Shipbuilding & Offshore

Need plates cut to a specific size?

Send us your thickness, grade and cutting list — we will confirm availability, lead time and price.

Get a Quote