Welcome to Rajdeep Metals
Maulana Azad Road, Mumbai-400004
Product 03 / 08

Rods & Bars

Round, hex, square and flat bars in Stainless Steel, Precipitation-Hardening, Duplex, Nickel Alloys, Carbon Steel and Alloy Steel — bright, black, peeled or forged, cut to length in Mumbai.

Bright & Forged Stainless steel round bars and rods stocked by Rajdeep Metals
Product Overview

Bar Stock for Machining & Forging

Rajdeep Metals supplies rods and bars for shafts, valve trim, pump components, fasteners, fittings and precision-machined parts. Bars are traceable to their mill heat and supplied with test certificates covering chemistry and mechanical properties.

Whether you need a few metres of bright round bar for a prototype or forged rounds for a production run, we help you select the grade, heat-treatment condition and finish that suit your machining process and service conditions.

  • Round bars 3 mm to 500 mm
  • Round, hex, square & flat
  • h9 / h11 bright tolerances
  • EN 10204 3.1 / 3.2 MTC
  • Saw-cut to required length
  • UT-tested bars on request

Types of Rods & Bars

Shapes, finishes and product forms we supply
Round Bars – 3D drawing
Round Bars
Hex Bars – 3D drawing
Hex Bars
Square Bars – 3D drawing
Square Bars
Flat Bars – 3D drawing
Flat Bars
Rectangular Bars – 3D drawing
Rectangular Bars
Bright Bars – 3D drawing
Bright Bars
Black Bars – 3D drawing
Black Bars
Peeled & Polished Bars – 3D drawing
Peeled & Polished Bars
Forged Bars – 3D drawing
Forged Bars
Threaded Rods – 3D drawing
Threaded Rods
Hollow Bars – 3D drawing
Hollow Bars
Angles & Channels – 3D drawing
Angles & Channels

Specifications

Standards, size range and supply conditions
Stainless SteelASTM A276, A479, A484, A182 / ASME SA479, SA182
Precipitation HardeningASTM A564 Type 630 (17-4PH) — Condition A, H900, H1025, H1075, H1150
Nickel AlloysASTM B160, B164, B166, B408, B425, B446, B574 / ASME SB equivalents
Carbon SteelASTM A105, AISI 1020, AISI 1045, EN8
Alloy SteelAISI 4140, AISI 4340 (annealed or hardened & tempered)
Round Bar Diameter3 mm to 500 mm
Hex Bar (A/F)6 mm to 100 mm
Square & Flat BarSquare 6 mm – 150 mm  |  Flat 3 mm – 50 mm thick × 10 mm – 300 mm wide
Length1 m to 6 m, random or cut to specified length
FinishBlack, Bright (cold drawn), Peeled, Centreless Ground, Polished
Toleranceh9, h10, h11, k12 or as required
TestingUltrasonic, PMI, IGC, Hardness, Tensile, Impact, Macro / Micro Examination

Grades Available

Common grades held in stock or sourced at short notice

Stainless Steel

303304304L 316316L316Ti 321347310S 904L

Martensitic & PH

410416420 43117-4PH (630)15-5PH

Duplex & Nickel Alloys

S31803S32205S32750 Nickel 200Monel 400 / K500 Inconel 600 / 625Incoloy 825 Hastelloy C276

Carbon & Alloy Steel

A105AISI 1020 AISI 1045EN8 AISI 4140AISI 4340

Chemical Composition

Weight % — maximum unless a range is shown (ASTM A276 / A479 / A564)
GradeCMnSiPSCrNiMoOther
3040.082.001.000.0450.03018.0 – 20.08.0 – 10.5—N 0.10
3160.082.001.000.0450.03016.0 – 18.010.0 – 14.02.00 – 3.00N 0.10
316L0.0302.001.000.0450.03016.0 – 18.010.0 – 14.02.00 – 3.00N 0.10
4100.08 – 0.151.001.000.0400.03011.5 – 13.5———
4200.15 min1.001.000.0400.03012.0 – 14.0———
4310.201.001.000.0400.03015.0 – 17.01.25 – 2.50——
17-4PH (630)0.071.001.000.0400.03015.0 – 17.53.0 – 5.0—Cu 3.0 – 5.0, Nb 0.15 – 0.45
2205 (S32205)0.0302.001.000.0300.02022.0 – 23.04.5 – 6.53.0 – 3.5N 0.14 – 0.20

Chemical composition for nickel alloy, carbon steel and alloy steel bars is listed on the respective material pages.

Mechanical Properties

Minimum values at room temperature (ASTM A276 / A479 / A564)
GradeConditionTensile Strength (MPa)Yield Strength 0.2% (MPa)Elongation in 50 mm (%)
304Annealed51520540
316Annealed51520540
304L / 316LAnnealed48517040
410Annealed48527520
17-4PH (630)H9001310117010
17-4PH (630)H115093072516
2205 (S32205)Annealed62045025

Properties of hardened & tempered martensitic grades (410, 420, 431) and alloy steels depend on the heat-treatment condition ordered. Values for other materials are on the respective material pages.

Dimension Chart

Theoretical weight of stainless steel bars in kg per metre

Round Bar Weight

Diameter (mm)681012162025
Weight (kg/m)0.2240.3990.6230.8971.5942.4913.892
Diameter (mm)3040506080100
Weight (kg/m)5.6059.96515.5722.4239.8662.28

Hex Bar Weight

Across Flats (mm)10172227324150
Weight (kg/m)0.6871.9853.3245.0067.03211.5417.17

Square Bar Weight

Side (mm)1020254050
Weight (kg/m)0.7933.1724.95612.6919.83

Weights calculated for austenitic stainless steel at a density of 7.93 g/cm³ — Round: 0.006228 × D²; Hex: 0.006867 × A/F²; Square: 0.00793 × a² (dimensions in mm). See Technical Data for other materials.

Applications

Industries that rely on our rods & bars

Oil & Gas

Shafts & Machined Parts

Valves & Pumps

Fasteners & Fittings

Chemical Processing

Power Generation

Aerospace

Automotive

Medical & Surgical

Marine & Offshore

Need bars in a specific size or condition?

Share your grade, diameter, tolerance and quantity — we will confirm availability, lead time and price.

Get a Quote