| NPS (inch) | DN | OD (mm) | SCH 5S | SCH 10S | SCH 40 | SCH 80 | SCH 160 | XXS |
|---|---|---|---|---|---|---|---|---|
| 1/2" | 15 | 21.3 | 1.65 | 2.11 | 2.77 | 3.73 | 4.78 | 7.47 |
| 3/4" | 20 | 26.7 | 1.65 | 2.11 | 2.87 | 3.91 | 5.56 | 7.82 |
| 1" | 25 | 33.4 | 1.65 | 2.77 | 3.38 | 4.55 | 6.35 | 9.09 |
| 1 1/4" | 32 | 42.2 | 1.65 | 2.77 | 3.56 | 4.85 | 6.35 | 9.70 |
| 1 1/2" | 40 | 48.3 | 1.65 | 2.77 | 3.68 | 5.08 | 7.14 | 10.15 |
| 2" | 50 | 60.3 | 1.65 | 2.77 | 3.91 | 5.54 | 8.74 | 11.07 |
| 2 1/2" | 65 | 73.0 | 2.11 | 3.05 | 5.16 | 7.01 | 9.53 | 14.02 |
| 3" | 80 | 88.9 | 2.11 | 3.05 | 5.49 | 7.62 | 11.13 | 15.24 |
| 4" | 100 | 114.3 | 2.11 | 3.05 | 6.02 | 8.56 | 13.49 | 17.12 |
| 6" | 150 | 168.3 | 2.77 | 3.40 | 7.11 | 10.97 | 18.26 | 21.95 |
| 8" | 200 | 219.1 | 2.77 | 3.76 | 8.18 | 12.70 | 23.01 | 22.23 |
| 10" | 250 | 273.0 | 3.40 | 4.19 | 9.27 | 15.09 | 28.58 | 25.40 |
| 12" | 300 | 323.8 | 3.96 | 4.57 | 10.31 | 17.48 | 33.32 | 25.40 |
SCH 5S and 10S apply to stainless steel pipe (ASME B36.19M). Intermediate schedules and larger sizes available on request.
(OD − WT) × WT × 0.02491 (SS)
(OD − WT) × WT × 0.02466 (CS)
OD = outside diameter, WT = wall thickness.
D² × 0.00623 (SS)
D² × 0.00617 (CS)
D = diameter.
A/F² × 0.00686 (SS)
A/F = across flats.
A² × 0.00793 (SS)
A = side of square.
L (m) × W (m) × T (mm) × 7.93 (SS)
L (m) × W (m) × T (mm) × 7.85 (CS)
L = length, W = width, T = thickness.
W × T × 0.00793 (SS)
W = width, T = thickness.
For other materials, multiply the stainless steel result by (material density ÷ 7.93).
| Material | Density (g/cm³) |
|---|---|
| Carbon Steel | 7.85 |
| Stainless Steel 304 / 304L | 7.93 |
| Stainless Steel 316 / 316L | 7.98 |
| Duplex 2205 | 7.80 |
| Monel 400 | 8.80 |
| Inconel 600 | 8.47 |
| Inconel 625 | 8.44 |
| Incoloy 825 | 8.14 |
| Hastelloy C276 | 8.89 |
| Copper | 8.94 |
| Brass | 8.50 |
| Cu-Ni 90/10 | 8.94 |
| Aluminium | 2.70 |
| Lead | 11.34 |
| Material Group | Class 150 | Class 300 | Class 600 | Class 900 | Class 1500 | Class 2500 |
|---|---|---|---|---|---|---|
| Group 1.1 (A105) | 19.6 | 51.1 | 102.1 | 153.2 | 255.3 | 425.5 |
| Group 2.2 (316) | 19.0 | 49.6 | 99.3 | 148.9 | 248.2 | 413.7 |
Allowable pressure reduces as temperature increases — refer to the full ASME B16.5 pressure-temperature tables for elevated-temperature service.
| From | Equals |
|---|---|
| 1 inch | 25.4 mm |
| 1 ft | 0.3048 m |
| 1 lb | 0.4536 kg |
| 1 ksi | 6.895 MPa |
| 1 MPa | 145.04 psi |
| 1 bar | 14.504 psi |
| 1 kgf/cm² | 0.981 bar |
| °F | °C × 1.8 + 32 |
| HRC | HB | HV | Approx. Tensile Strength (MPa) |
|---|---|---|---|
| 20 | 226 | 238 | 770 |
| 25 | 253 | 266 | 860 |
| 30 | 286 | 302 | 965 |
| 35 | 327 | 345 | 1110 |
| 40 | 371 | 392 | 1290 |
| 45 | 421 | 446 | 1480 |
| 50 | — | 513 | 1690 |
Values are for reference only; refer to the governing standard for design.
Send us your bill of materials — we will confirm sizes, weights, availability and price.