Non-ferrous metals contain no significant iron, so they do not rust and are typically non-magnetic. Copper and its alloys combine excellent thermal and electrical conductivity with natural resistance to biofouling, which is why they dominate condenser tubing and seawater systems. Aluminium offers a high strength-to-weight ratio, and lead remains the material of choice for radiation shielding and acid-resistant linings.
Rajdeep Metals supplies copper, brass, cupro-nickel 90/10 and 70/30, aluminium alloys and lead in tube, pipe, plate, rod and wire forms, along with cupro-nickel fittings and flanges for complete piping packages.
| Copper Tubes | ASTM B75 (seamless), B88 (water tube), B280 (ACR), B111 (condenser) |
|---|---|
| Brass & Cu-Ni Condenser Tubes | ASTM B111 / ASME SB111, B395 (U-bend), B543 (welded) |
| Cu-Ni Pipes | ASTM B466 / ASME SB466 (seamless), B467 (welded), EEMUA 144 |
| Sheets & Plates | ASTM B152 (copper), B36 (brass), B171 (condenser plate / tube sheet), B122 (Cu-Ni), B209 (aluminium) |
| Rods & Bars | ASTM B187 (copper), B16 / B124 (brass), B151 (Cu-Ni), B221 (aluminium extrusions), B211 (aluminium drawn) |
| Aluminium Pipe & Tube | ASTM B241 (seamless pipe), B210 (drawn tube), B221 |
| Cu-Ni Fittings & Flanges | EEMUA 146 (fittings), EEMUA 145 (flanges), ASME B16.9 / B16.5 dimensions in B466 / B151 material |
| Wire | ASTM B1, B2, B3 (copper), B134 (brass) |
| Lead | ASTM B29 (refined pig lead), lead sheets to customer thickness |
| Alloy | Cu | Zn | Ni | Fe | Mn | Sn | Pb | Other |
|---|---|---|---|---|---|---|---|---|
| C11000 (ETP) | 99.90 min | — | — | — | — | — | — | O 0.04 |
| C12200 (DHP) | 99.9 min | — | — | — | — | — | — | P 0.015 – 0.040 |
| C26000 (70/30) | 68.5 – 71.5 | Rem. | — | 0.05 | — | — | 0.07 | — |
| C28000 (Muntz) | 59.0 – 63.0 | Rem. | — | 0.07 | — | — | 0.30 | — |
| C44300 (Admiralty) | 70.0 – 73.0 | Rem. | — | — | — | 0.8 – 1.2 | — | As 0.02 – 0.06 |
| C46400 (Naval) | 59.0 – 62.0 | Rem. | — | — | — | 0.5 – 1.0 | — | — |
| C70600 (90/10) | Rem. | — | 9.0 – 11.0 | 1.0 – 1.8 | 1.0 | — | — | — |
| C71500 (70/30) | Rem. | — | 29.0 – 33.0 | 0.4 – 1.0 | 1.0 | — | — | — |
| Alloy | Mg | Si | Mn | Cu | Cr | Fe | Base |
|---|---|---|---|---|---|---|---|
| Aluminium 6061 | 0.8 – 1.2 | 0.4 – 0.8 | — | 0.15 – 0.40 | 0.04 – 0.35 | 0.7 | Al Rem. |
| Aluminium 5083 | 4.0 – 4.9 | — | 0.4 – 1.0 | — | 0.05 – 0.25 | — | Al Rem. |
| Lead | — | — | — | — | — | — | Pb 99.94 min |
"Rem." = remainder. Only principal elements are shown; refer to the governing ASTM specification for full impurity limits.
| Alloy | Temper | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) |
|---|---|---|---|---|
| C11000 | Annealed | 220 | 69 | 45 |
| C12200 | Annealed | 220 | 69 | 45 |
| C26000 | Annealed | 330 | 105 | 55 |
| C44300 | B111 O61 | 310 | 105 | — |
| C70600 | B111 O61 | 275 | 105 | 30 |
| C71500 | O61 | 360 | 125 | 30 |
| Aluminium 6061 | T6 | 290 | 240 | 10 |
| Aluminium 5083 | H116 | 305 | 215 | 10 |
Strength of copper alloys and aluminium changes markedly with temper (annealed, half-hard, hard, T-tempers). Please state the required temper when enquiring.
| Alloy | UNS | EN | Common Name |
|---|---|---|---|
| C11000 | C11000 | CW004A | ETP Copper |
| C12200 | C12200 | CW024A | DHP Copper |
| C26000 | C26000 | CW505L | Cartridge Brass 70/30 |
| C28000 | C28000 | CW509L | Muntz Metal 60/40 |
| C44300 | C44300 | CW706R | Admiralty Brass |
| C46400 | C46400 | — | Naval Brass |
| C70600 | C70600 | CW352H | 90/10 Cu-Ni |
| C71500 | C71500 | CW354H | 70/30 Cu-Ni |
| 6061 | A96061 | EN AW-6061 | Aluminium 6061 |
| 5083 | A95083 | EN AW-5083 | Marine Aluminium 5083 |
Equivalents are for reference; composition limits are not always identical between standards.
Send us the alloy, temper and dimensions — we will confirm availability, lead time and price.