Welcome to Rajdeep Metals
Maulana Azad Road, Mumbai-400004
Product 05 / 08

Industrial Flanges

Forged and plate flanges in Stainless Steel, Duplex, Nickel Alloys, Carbon Steel and Alloy Steel — weld neck, slip-on, blind, socket weld, threaded, lap joint and special flanges in all pressure classes.

Forged & Machined Stainless steel and carbon steel forged flanges stocked by Rajdeep Metals
Product Overview

Leak-Tight Flanged Joints, Every Class

Rajdeep Metals supplies forged flanges to ASME B16.5, B16.47 and EN 1092-1 for process piping, pressure vessels, pumps and valves. Each flange is marked with its standard, size, class, facing, material grade and heat number.

We help you pair the right flange type, rating and facing with your pipe schedule and gasket, so the joint holds at design pressure and temperature — from Class 150 utility lines to Class 2500 high-pressure service.

  • Sizes 1/2" NB to 60" NB
  • Class 150 to 2500
  • PN6 to PN64
  • RF, FF, RTJ facings
  • EN 10204 3.1 / 3.2 MTC
  • Custom drawings machined

Types of Flanges

Standard and special flange designs we supply
Weld Neck Flanges – 3D drawing
Weld Neck Flanges
Slip-On Flanges – 3D drawing
Slip-On Flanges
Blind Flanges – 3D drawing
Blind Flanges
Socket Weld Flanges – 3D drawing
Socket Weld Flanges
Threaded Flanges – 3D drawing
Threaded Flanges
Lap Joint Flanges – 3D drawing
Lap Joint Flanges
Long Weld Neck Flanges – 3D drawing
Long Weld Neck Flanges
Orifice Flanges – 3D drawing
Orifice Flanges
Spectacle Blinds – 3D drawing
Spectacle Blinds
Reducing Flanges – 3D drawing
Reducing Flanges
Plate Flanges – 3D drawing
Plate Flanges
Ring Joint Flanges – 3D drawing
Ring Joint Flanges

Specifications

Standards, size range and supply conditions
Dimension StandardsASME B16.5 (1/2" – 24"), ASME B16.47 Series A & B (26" – 60"), ASME B16.48, MSS SP-44, EN 1092-1, BS 4504
Stainless SteelASTM A182 F304 / F304L / F316 / F316L / F321 / F347
Duplex & Super DuplexASTM A182 F51 (S31803), F53 (S32750), F55 (S32760)
Nickel AlloysASTM B564 — Monel 400, Inconel 600 / 625, Incoloy 800 / 825, Hastelloy C276
Carbon SteelASTM A105, A350 LF2 (low temperature), A694 F42 – F70 (high yield)
Alloy SteelASTM A182 F11 / F22 / F91
Pressure ClassASME: 150, 300, 600, 900, 1500, 2500  |  EN / BS: PN6, PN10, PN16, PN25, PN40, PN64
FacingRaised Face (RF), Flat Face (FF), Ring Type Joint (RTJ), Tongue & Groove, Male & Female
Face FinishStock (serrated) finish 125 – 250 µin Ra, Smooth finish, or as specified
BoreMatched to pipe schedule — SCH 5S to XXS
TestingPMI, Ultrasonic, Dye Penetrant, IGC, Hardness, Impact (LF2), Dimensional Inspection

Grades Available

Common grades held in stock or sourced at short notice

Stainless Steel

F304F304LF304H F316F316LF316Ti F321F347F310 F904L

Duplex & Super Duplex

F51 (S31803)F60 (S32205) F53 (S32750)F55 (S32760)

Nickel Alloys

Monel 400Inconel 600 Inconel 625Incoloy 800 / 800H Incoloy 825Hastelloy C276

Carbon & Alloy Steel

A105A350 LF2 A694 F52A694 F65 F11F22F91

Chemical Composition

Weight % — maximum unless a range is shown (ASTM A182 / A105 / A350)
GradeCMnSiPSCrNiMoOther
F3040.082.001.000.0450.03018.0 – 20.08.0 – 11.0—N 0.10
F304L0.0302.001.000.0450.03018.0 – 20.08.0 – 12.0—N 0.10
F3160.082.001.000.0450.03016.0 – 18.010.0 – 14.02.00 – 3.00N 0.10
F316L0.0302.001.000.0450.03016.0 – 18.010.0 – 15.02.00 – 3.00N 0.10
F3210.082.001.000.0450.03017.0 – 19.09.0 – 12.0—Ti 5×(C+N) – 0.70
F51 (S31803)0.0302.001.000.0300.02021.0 – 23.04.5 – 6.52.5 – 3.5N 0.08 – 0.20
A1050.350.60 – 1.050.10 – 0.350.0350.0400.300.400.12Cu 0.40, V 0.08
A350 LF20.300.60 – 1.350.15 – 0.300.0350.0400.300.400.12Cu 0.40, Nb 0.02, V 0.08

Chemical composition for nickel alloy, A694 and alloy steel flanges is listed on the respective material pages.

Mechanical Properties

Minimum values at room temperature
GradeTensile Strength (MPa)Yield Strength 0.2% (MPa)Elongation (%)Hardness (max)
F304 / F316 / F32151520530—
F304L / F316L48517030—
F51 (S31803)62045025—
A10548525022187 HB
A350 LF2485 – 65525022197 HB

A350 LF2 Class 1 is impact tested at −46 °C (−50 °F). Values for other materials are on the respective material pages.

Dimension Chart

ASME B16.5 Class 150 flange dimensions in mm
NPS (inch)Flange OD (mm)Thickness (mm)Bolt Circle Dia. (mm)No. of BoltsBolt Dia. (inch)
1/2"909.660.341/2
3/4"10011.269.941/2
1"11012.779.441/2
1 1/4"11514.388.941/2
1 1/2"12515.998.441/2
2"15017.5120.745/8
2 1/2"18020.7139.745/8
3"19022.3152.445/8
4"23022.3190.585/8
6"28023.9241.383/4
8"34527.0298.583/4
10"40528.6362.0127/8
12"48530.2431.8127/8

Thickness is the minimum flange thickness excluding the 1.6 mm raised face. Dimensions for Class 300 – 2500, B16.47 large-diameter and EN 1092-1 flanges are available on request. See Technical Data for more.

Applications

Industries that rely on our flanges

Oil & Gas Refineries

Pipelines

Petrochemical Plants

Chemical Processing

Power Generation

Valves & Pumps

Pharmaceuticals

Fertilizer Plants

Water & Desalination

Marine & Offshore

Need flanges in a specific class or facing?

Share your size, rating, facing and material — we will confirm availability, lead time and price.

Get a Quote