Alloy steels add controlled amounts of chromium and molybdenum to carbon steel. Chromium improves oxidation and sulphidation resistance, while molybdenum raises creep strength at elevated temperatures. The result is a family of grades that can carry steam and hydrocarbons at temperatures where plain carbon steel would soften and creep.
Rajdeep Metals supplies the established Cr-Mo grades — from 1¼Cr-½Mo (P11) and 2¼Cr-1Mo (P22) to 5Cr, 9Cr and the creep-strength-enhanced P91 — as matched packages of pipe, plate, fittings, flanges and fasteners, so the whole line shares one material specification.
| Seamless Pipe | ASTM A335 / ASME SA335 P5, P9, P11, P22, P91 |
|---|---|
| Welded Pipe | ASTM A691 (EFW, 1¼CR, 2¼CR, 5CR, 9CR, 91) |
| Boiler & Heat Exchanger Tubes | ASTM A213 / ASME SA213 T5, T9, T11, T22, T91 |
| Plates | ASTM A387 / ASME SA387 Gr. 5, 9, 11, 22, 91 — Class 1 & 2 |
| Rods & Bars | ASTM A182 (forged bar), A739, AISI / SAE 4140 to ASTM A29 / A322 |
| Buttweld Fittings | ASTM A234 / ASME SA234 WP5, WP9, WP11, WP22, WP91 — ASME B16.9, B16.28 |
| Forged Fittings & Flanges | ASTM A182 / ASME SA182 F5, F9, F11, F22, F91 — ASME B16.5, B16.11, B16.47 |
| Fasteners | ASTM A193 B7 / B16, A194 2H / 4 / 7, A320 L7 |
| Dimension Standards | ASME B36.10M, EN 10216-2 |
| Grade | C | Mn | P | S | Si | Cr | Mo | Other |
|---|---|---|---|---|---|---|---|---|
| P5 | 0.15 | 0.30 – 0.60 | 0.025 | 0.025 | 0.50 | 4.00 – 6.00 | 0.45 – 0.65 | — |
| P9 | 0.15 | 0.30 – 0.60 | 0.025 | 0.025 | 0.25 – 1.00 | 8.00 – 10.00 | 0.90 – 1.10 | — |
| P11 | 0.05 – 0.15 | 0.30 – 0.60 | 0.025 | 0.025 | 0.50 – 1.00 | 1.00 – 1.50 | 0.44 – 0.65 | — |
| P22 | 0.05 – 0.15 | 0.30 – 0.60 | 0.025 | 0.025 | 0.50 | 1.90 – 2.60 | 0.87 – 1.13 | — |
| P91 | 0.08 – 0.12 | 0.30 – 0.60 | 0.020 | 0.010 | 0.20 – 0.50 | 8.00 – 9.50 | 0.85 – 1.05 | V 0.18 – 0.25, Nb 0.06 – 0.10, N 0.030 – 0.070 |
| AISI 4140 | 0.38 – 0.43 | 0.75 – 1.00 | 0.035 | 0.040 | 0.15 – 0.35 | 0.80 – 1.10 | 0.15 – 0.25 | — |
A387 plate, A182 forging and A234 fitting grades share the same nominal Cr-Mo chemistry with minor differences in limits.
| Grade | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) |
|---|---|---|---|
| A335 P5 / P9 / P11 / P22 | 415 | 205 | 30 |
| A335 P91 | 585 | 415 | 20 |
| A182 F11 Class 2 | 485 | 275 | 20 |
| A182 F22 Class 3 | 515 | 310 | 20 |
Pipe elongation is the longitudinal value for standard round specimens. P91 requires normalising and tempering; post-weld heat treatment is mandatory for most Cr-Mo grades.
| Grade | UNS | Werkstoff Nr. | EN | Nominal Composition |
|---|---|---|---|---|
| P11 | K11597 | 1.7335 | 13CrMo4-5 | 1¼Cr-½Mo |
| P22 | K21590 | 1.7380 | 10CrMo9-10 | 2¼Cr-1Mo |
| P5 | K41545 | 1.7362 | X11CrMo5 | 5Cr-½Mo |
| P9 | K90941 | 1.7386 | X11CrMo9-1 | 9Cr-1Mo |
| P91 | K91560 | 1.4903 | X10CrMoVNb9-1 | 9Cr-1Mo-V-Nb |
Equivalents are for reference; chemistry and property limits are not always identical between standards.
Send us your line list or BOQ — we will quote pipe, fittings, flanges and fasteners together.